Secure the power wire using a screwdriver. Route the power wire through an existing hole in the vehicle's firewall to the Visonik VBX12A. 4 Attach the red power wire with in-line fuse from an amplifier wiring kit to the vehicle's positive battery terminal by slipping the grommet end over the terminal and securing with the provided nut and a crescent wrench. Expose the stereo wires by sliding the stereo forward.ģ Secure the Visonik VBX12A in place using the provided hardware and following the manufacturer's instructions. Remove the screws that secure the stereo in place using a screwdriver. 2 Remove the plastic bezel that surrounds the stereo using a panel removal tool. Skill level:Moderate Things you need Crescent wrenchPanel toolScrewdriverAmplifier wiring kitKlein toolElectrical tape Instructions 1 Locate the vehicle's battery and disconnect the black negative cable using a crescent wrench. The Visonik VBX12A features RCA inputs which help to simplify the installation when used with an amplifier wiring kit. The built-in amplifier, stable down to four ohms, is capable of producing 225 watts of constant power. Consisting of a subwoofer enclosure, subwoofer and amplifier, the Visonik VBX12A is an all-in-one aftermarket solution for reproducing low-end frequencies produced by your vehicle's stereo receiver.
0 Comments
Leave a Reply. |